Get your PC running like new in minutes!
Over the past few weeks, some readers have reported to us that they encountered a fatal rtl8129 module that was not found.
In order to ensure reliable operation of the RTL8188CE wireless card, I tried to install the dedicated rtl8192ce driver directly from the Realtek website. However, now I worry at the kernel level every time I try to load our own driver. I was able to prevent this from happening again in safe mode, which is run with the Realtek Uninstall
make script. Now my card usually doesn't have a driver that has them and it doesn't show up in the network manager anymore. When I try to manually download the rtl8192ce segment I get:
FATAL: Module rtl8192ce indeed found.
So, how do I reinstall our own original Ubuntu rtl8192ce driver in order to have at least some connectivity?
mlx4_core: 1' not valid for the hpn' parameter messagedisplayedin file
mlx4_core: invalid "1" due to "hpn" parameterFATAL: error inserting mlx4_core (/lib/modules/3.10.0-229.rt56.162.el6rt.x86_64/kernel/drivers/net/ethernet/mellanox/mlx4/mlx4_core.ko): invalid argumentFATAL: Failed to execute install command to create mlx4_core.
kernel-rt-3.10.0-657.rt56.574.el6rtor higher. If updating the kernel is not possible, you can usually follow the solution:
/etc/modprobe.d/libmlx4.confand write the line below it:
Parameters mlx4_core hpn=1
#cat etc/modprobe.d/libmlx4.confinstall mlx4_core /sbin/modprobe --ignore-install mlx4_core && [ (if -f /usr/libexec/setup-mlx4.sh -a -f /etc/rdma/mlx4.conf ] ; this time /usr/libexec/ setup - mlx4.sh < /etc/rdma/mlx4.conf; fi; /sbin/modprobe mlx4_en; /sbin/modprobe mlx4_ib)
# ip a1: lo:
mtu 65536 qdisc noqueue state UNKNOWN qlen 1 Link/loop 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 lo host capacity valid_lft forever, prefer_lft forever inet6:: 1/128 range of hosts valid_lft once Preferred_lft forever
mlx4_en) definitely not loaded:
#lsmod | grep mlx4_en
mlx4_en) shows errors:
# error modprobe mlx4_enFATAL: mlx4_en release (lib/modules/3.10.0-229.rt56.162.el6rt.x86_64/kernel/drivers/net/ethernet/mellanox/mlx4/mlx4_en.ko): unknown symbol in module, possibly unknown parameter ( see dmesg)
This solution is part of Red Hat's Fast Track Publishing program, which provides a hugely popular library of solutions created by Red Hat engineers with support from some of our customers. To let you know you'll need them when they become available, these elements can be framed in their raw, unmodified form.
Powered by vBulletin® process version 4.2.5 Copyright © 2022 vBulletin Solutions Inc. All rights reserved.
iam Fedora 4 with Windows XP (dual boot).
I have installed a PCI RTL8139D network card and it works fine on Windows XP.
The problem is that some network cards for FC4 are not recognized, and for this I took a driver that I paired with the network card.
Referring to the informational Readme.txt instructions that came with the driver, I tried to fully compile 8139too.c using the makefile that came with the driver.
When I installed my spouse's driver by running make, I got the error
Assembly sc92031.o for 2.6.11-1.1369_FC4
Included in file during /lib/modules/2.6.11-1.1369_FC4/build/include/asm/processor
comes from /lib/modules/2.6.11-1.1369_FC4/build/include/linux/capabil
due to /lib/modules/2.6.11-1.1369_FC4/build/include/linux/sched.h